Table of Contents Previous Next Index

IntroductionSONAR basics ► Views

Track view is the main window that you use to create, display, and work with a project. When you open a project file, SONAR displays the Track view for the project. When you close the Track view for a project, SONAR closes the file.
The Track view is divided into several sections: menu bar (at the top), the Navigator pane, the Video Thumbnails pane, the Track pane, the Inspector pane, the Clips pane, the Bus pane, the Browser pane, and the MultiDock.
Figure 7. The Track view.
A. Control Bar B. Inspector pane C. Track pane D. Clips pane E. Video Thumbnail pane F. Browser G. MultiDock
The Track pane lets you see and change the initial settings for each track. To change the current track, move the highlight using the mouse or the keyboard as follows.
Table 4.  
The Clips pane shows the clips in your project on a horizontal timeline called the time ruler that helps you visualize how your project is organized. Clips contain markings that indicate their contents. The Clips pane lets you select, move, cut and copy clips from place to place to change the arrangement of music and sound in your project.
The Bus pane shows the buses in the project, and also shows any editing views that are in tabbed (docked) format. The Show/Hide Bus pane button allows you to show or hide the Bus pane at the bottom of the Track view.
The Navigator pane displays a large part of your project so you can see an overview of your song. The Navigator pane displays all of your project’s tracks.
A. Dock/undock Inspector B. Show/hide Clip Properties Inspector C. Show/hide Track Properties Inspector D. Show/hide ProChannel E. Display area for Properties Inspector F. Display area for Track Inspectors G. Show/hide/configure Track Inspector modules H. Section header bars (click to show controls) I. Show audio output or MIDI settings (Instrument tracks only)
Track Inspector. The Track Inspector shows mix settings for the current track, bus, or main, and is essentially identical to a channel strip in the Console view. Advanced MIDI settings are also available for MIDI tracks and Instrument tracks. For details, see Track Inspector overview.
Properties Inspector. The Properties Inspector shows properties for the selected clip(s) or track(s). For details, see Properties Inspector overview. The Properties Inspector has two modes:
Clip. The Clip Properties Inspector displays settings for the currently selected clip(s). For details, see Properties Inspector - Clip Properties.
Track. The Track Properties Inspector lets you type a track name, specify an audio track’s AudioSnap render modes, specify the default clip colors, and enter a text description. For details, see Properties Inspector - Track Properties.
ProChannel (Producer only). ProChannel combines compression, equalization, and tube saturation modeling in one convenient processor. ProChannel is available on each audio track, Instrument track and bus. For details, see ProChannel (Producer and Studio only).
The Control Bar consists of several modules that each contain various related controls. You can re-arrange and show/hide each individual module, which allows you to only show the functions you need most often. By default, the Control Bar is docked at the top of SONAR’s screen, but can also be undocked or docked at the bottom.
Figure 9. The Control Bar.
The Console view is where you can mix the sounds on all the different tracks to create the final mix of your project. While the Track view provides most of the same controls, you may want to use the more familiar interface of the Console view for mixing. You use the Console view to adjust the levels of sound for the different tracks in your project, to change the stereo panning, and to apply real-time effects to an individual track, combinations of tracks, or the final mix.
Figure 10. The Console view
A. Console view menu B. ProChannel (Producer only) C. Pane splitter bars D. Track channel strips E. Bus channel strips F. Main channel strips
The Piano Roll view shows the notes from a MIDI track or tracks as they would appear on a player-piano roll. You can move the notes around, make them longer or shorter, and change their pitches by just dragging them with the mouse. You can also use the Piano Roll view to display and edit MIDI velocity, controllers, and other types of information. The Piano Roll view also contains the Drum Editor, which allows you to play different drum modules from a single track. For more information, see Piano Roll view.
A. Piano Roll view menu B. Key/Pitch pane C. Note pane
Figure 12. The Staff view
A. Staff view menu B. Zoom in/out C. Staff pane D. Editing tools E. Time and pitch locator F. Dock/undock and expand/collapse G. Track list pane H. Fretboard pane
Figure 14. The Browser.
A. Media Browser B. Plug-in Browser C. Synth Rack Browser
Table 5.  
Step Sequencer (not available in SONAR LE)
Figure 16. Zoom controls
A. Zoom Clips pane out vertically B. Vertical Zoom fader for Clips pane C. Zoom Clips pane in vertically D. Zoom Bus pane out vertically E. Vertical Zoom fader for Bus pane F. Zoom Bus pane in vertically G. Zoom in horizontally H. Horizontal zoom fader I. Zoom out horizontally
Table 6.  
Table 7.  
Do one of the following:
Click the Track view Views menu and select Auto Zoom.
Do one of the following:
You can dock any view other than the Console view in the MultiDock by enabling a view’s Dock in MultiDock option. You can have as many views open in tabbed format as you want. You can toggle through the different views by clicking the tab of the view you want to see (or use the CTRL+SHIFT+LEFT/RIGHT ARROW shortcut). You can also maximize the pane to do detailed work in a view, or drag the splitter bar at the top of the view to enlarge the tabbed view area.
Figure 17. The MultiDock.
A. Each docked window has its own tab B. Click to the right of the tabs and drag the MultiDock away from the bottom of the screen in order to undock the MultiDock C. Dock/undock and expand/collapse the MultiDock
To lock a view, do one of the following:
Click the upper left corner of a window, and choose Lock Contents from the pop-up menu.
Use the Edit > Preferences command to open the Preferences dialog box, then select Keyboard Shortcuts.
If you want to use currently unassigned keys or key combinations, scroll through the options in the Key window until the Assigned to field that is just under the window reads Unassigned. It’s a good idea to find two unassigned options that are next to each other or easy to remember.
Once you’ve decided on two keys or key combinations that you want to use, select Global Bindings in the Area field, and scroll to the bottom of the list of commands that are in the window below that field.
In the Key window, highlight the key or key combination that you want to use for the X-Ray command, then highlight X-Ray in the function column of the list of commands, then click the Bind button to bind them together.
Now highlight the key or key combination that you want to use for the X-Ray All FX/Synths command, then highlight X-Ray All FX/Synths in the function column of the list of commands, then click the Bind button to bind them together.
Click OK to close the dialog box.
Use the Edit > Preferences command to open the Preferences dialog box, click Customization - Display and make sure the Enable X-Ray check box is selected.
Use the Edit > Preferences command to open the Preferences dialog box, then click Customization - Display.
Enable X-Ray. Enable or disable this check box to turn the X-Ray Windows feature on or off.
Opacity. Adjust this value by typing in a value, or by clicking and holding the + or - button to adjust the final opacity percentage value that an X-Rayed window reaches.
Fade Out Time. Adjust this value by typing in a value, or by clicking and holding the + or - button to adjust the amount of time that an X-Rayed window takes to reach its final opacity percentage value.
Fade In Time. Adjust this value by clicking and holding the + or - button to adjust the amount of time that an X-Rayed window takes to restore its original opacity.
Click OK to close the dialog box and accept your changes.
Open the Cakewalk Plug-in Manager: use the Utilities > Cakewalk Plug- in Manager command.
In the Plug-in Categories window, select the category that the plug-in you want to exclude is in.
In the Registered Plug-ins window, select the plug-in that you want to exclude.
Close the Plug-in Manager dialog box.
Open the Xrayexclude.ini file that’s in your SONAR program folder (use Notepad).
At the end of the file, find the [EffectProps View] section.
For example, if the last entry in the [EffectProps View] section was:; Waves SSL EQ Stereo
Save and close the Xrayexclude.ini file, and restart SONAR to implement your changes.
Copyright © 2022 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal