I’m having trouble installing the SPS hardware.

Last updated on 3/28/2016

The information in this article applies to:
 

  • SPS 66
  • SPS 25


Note: DO NOT connect your SPS-66 (or SPS-25) Hardware to your computer until you are instructed to do so by the onscreen dialog. Connecting your unit prematurely could disrupt the driver installation process. If you connected the SPS-66 Hardware prematurely, disconnect it and uninstall the driver by double-clicking the UNINSTAL.EXE program in the Hardware/Edirol FA-66/Driver/XP_EN folder on the installation CD.

First, make sure you download and install the latest driver for the SPS-66/SPS-25 located here:

XP Drivers
Vista Drivers
 
To install the latest driver after installing the driver from the CD, please follow the instructions below:

Updating to the latest Windows XP Drivers (Firewire)

 

  1. Create a Temp folder.
  2. Download the appropriate driver, for your Power Studio audio device, into this folder.
  3. Extract all the files into this folder.
  4. Disconnect your audio device.
  5. Double click on the setup.exe file.
  6. Click Uninstall, to remove the current driver.
  7. Click Next to continue.
  8. Click Install to install the updated driver.
  9. Follow the instructions in the dialogs and refer to the quick start manual that came with your audio device, if necessary.
  10. Once the installation is finished, launch SONAR Power Studio and go to Options | Audio | General and click Wave Profiler button. This will update your audio settings.

 

Updating to the latest Windows XP Drivers (USB)

  1. Create a Temp folder.
  2. Download the appropriate driver, for your Power Studio audio device, into this folder.
  3. Extract all the files into this folder.
  4. Disconnect your audio device.
  5. Double click on the Uninstal.exe, to remove the current driver.
  6. Restart when prompted.
  7. Double click on the Setup.exe file.
  8. Follow the instructions in the dialogs and refer to the quick start manual that came with your audio device, if necessary.
  9. Once the installation is finished, launch SONAR Power Studio and go to Options | Audio | General and click Wave Profiler button. This will update your audio settings.

 

Using Vista Drivers with SONAR Power Studio* (Firewire)

  1. Create a Temp folder.
  2. Download the appropriate Vista driver, for your Power Studio audio device, into this folder.
  3. Extract all the files into this folder.
  4. Disconnect your audio device.
  5. Double click on the Uninstal.exe, to remove the current driver.
  6. Restart when prompted.
  7. Double click on the Setup.exe file.
  8. Follow the instructions in the dialogs and refer to the quick start manual that came with your audio device, if necessary.
  9. Once the installation is finished, launch SONAR Power Studio and go to Options | Audio | General and click Wave Profiler button. This will update your audio settings.

 

Using Vista Drivers with SONAR Power Studio* (USB)

  1. Create a Temp folder.
  2. Download the appropriate Vista driver, for your Power Studio audio device, into this folder.
  3. Extract all the files into this folder.
  4. Disconnect your audio device.
  5. Double click on the Uninstal.exe, to remove the current driver.
  6. Restart when prompted.
  7. Double click on the Setup.exe file.
  8. Follow the instructions in the dialogs and refer to the quick start manual that came with your audio device, if necessary.
  9. Once the installation is finished, launch SONAR Power Studio and go to Options | Audio | General and click Wave Profiler button. This will update your audio settings.

*NOTE: The SONAR 5 Power Studio software is not officially supported on Windows Vista

Cakewalk // Support // Knowledge Base // I’m having trouble installing the SPS hardware.
Copyright © 2017 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal