Figure 3018. Large Surround Panner.A. Angle and focus marker B. Width markers C. Right speaker iconFigure 3019. Medium Surround PannerThe large surround panner has some sliders at the bottom that the medium surround panner doesn’t have, except for the LFE Send slider, which the medium panner has. Except for the sliders, the large and medium surround panners have the following controls:
Angle and Focus marker. A small sphere that you can drag in any direction to both control and display the following two parameters:
Angle. This is the perceived angle of the sound source as it differs from the position directly in front of the listener. The scale is 0 to 180 degrees on the listener’s right, and 0 to -180 degrees on the listener’s left. 0 means the sound is coming from directly in front of the listener, and plus or minus 180 degrees means that the sound is coming from directly behind the listener.
Focus. This is the perceived distance of the sound source from the center of the circle on a scale of 0 to 100, 0 meaning the center of the circle, and 100 meaning the perimeter.
Width markers. These are two smaller spheres equidistant from the Angle and Focus marker. Their distance from each other and from the front of the circle shows the Width value (see definition below). You can also drag the Width markers to control Angle and Focus.
Speaker icons/squares. Each surround channel is represented by a speaker icon in the large panner, and a white square in the small panner. The large panner also has a corresponding volume level in dB directly in front of each icon. The position of each speaker icon shows you each speaker’s position in the surround mix. Clicking a speaker icon or square mutes the corresponding channel, causing the icon or square to become gray. Double-clicking the icon solos its channel, turning the icon green.
Angle slider (large panner only). This slider both displays and controls the angle value.
Focus slider (large panner only). This slider both displays and controls the focus value.
Width slider (large panner only). This slider both displays and controls the width value. Width is a measure of how wide an area the sound seems to be coming from on a scale of 0 to 360 degrees. At 0 and 360 degrees, the sound seems to all come from a single speaker. At 180 degrees the sound seems to come from directly opposite sides. The default angle matches the project’s left and right channel angle. For example, in 5.1 SMPTE/ITU surround, the default width is 60 degrees.
Front/Rear Balance slider (large panner only). Abbreviated as FrntRrBl, this slider adjusts the front and rear balance. Drag it to the left to reduce the level from the front speakers, or drag it to the right to reduce rear level.
LFE slider. This slider both displays and controls the level of sound sent to the LFE channel.
LFE Only button (large panner only). This button mutes all channels except the LFE channel.
Right-click the small surround panner or the pan control in a track, and choose Open Surround Panner from the pop-up menu.
Select a track and choose Views > Surround Panner, or press ALT+SHIFT+9.
Double-click outside the Surround Panner circle.
In either the large or small surround panner, drag the Angle and Focus marker to the left or right.
In the large surround panner, drag the Angle slider.
In either the large or small surround panner, drag the Angle and Focus marker toward or away from the center.
In the large surround panner, drag the Focus slider.
In the large surround panner, drag the Width slider.
Note: Double-clicking any surround panner control will reset the control to its default value, which for the LFE control is -INF.
In the large surround panner, click the LFE Solo button.
In the large surround panner, drag the Width slider to 0, the Focus slider to 100, and then drag the Angle slider until the sphere icon is directly in front of the correct speaker.
In the large surround panner, right-click each slider that you want to add to the group, and choose Group-”n” from the pop-up menu.
Tip - Searching Documentation
Tip: To search for a specific topic, type your search query in the Search Cakewalk.com field at the top right of this page.
When the search results appear, click which product's documentation you would like to search to filter the search results further.
Note - Using Offline Help
Note: If you prefer to always use offline Help, go to Edit > Preferences > File > Advanced in your Cakewalk software and select Always Use Offline Help.
If you are not connected to the internet, your Cakewalk software will default to showing offline help until an internet connection becomes available.