Quantizing audio is a quick way to tighten up the feel of an audio track. AudioSnap provides several ways to quantize audio:
Method 3: Use the Extract Timing button on the AudioSnap palette to extract the timing from selected clips, then use the Apply Groove button to apply the extracted groove to the selected clips. For details, see To extract the groove from one clip and apply it to another clip.
3. Click the Quantize button in the AudioSnap palette.The Quantize dialog box appears.
4. Make sure the AudioSnap Beats check box is selected.
Note: You can only quantize to one rhythmic value at a time. If you don’t want to quantize all beats in an audio clip (to ensure the Quantize command doesn’t move them to a rhythmic placement where they don’t belong), temporarily disable any transient markers you don’t want to quantize. For details, see To disable a transient marker.The Groove Quantize command aligns transients with a groove that’s on the Clipboard or a pre-existing groove file. If you want to copy the timing from another audio clip to the Clipboard, see To extract MIDI timing from an audio clip.
3. On the Process menu, click Groove Quantize.The Groove Quantize dialog box appears.
4. In the Groove File field, select either Clipboard or the file that the groove pattern you want to use is saved in.
5. In the Groove Pattern field, select the groove pattern that you want to use.
6. Select the Resolution value that you want to quantize to.
7. Make sure the AudioSnap Beats check box is selected.
8. Click OK.
3. Click the Extract Timing button.The clip’s groove is extracted and vertical Pool lines are displayed to indicate the extracted transients.
5. Click the Apply Groove button.
3. In the Control Bar’s Snap module, select the Landmark Events button .
Note 1: If events do not appear to snap to audio transients, go to Edit > Preferences > Customization - Snap to Grid (or right-click the Snap to Grid button ) and make sure the Audio Transients check box is selected under Landmarks.
5. A common problem arises when two or more clips aren’t quite in sync with each other. You can fix this with AudioSnap if the sync errors aren’t huge. The AudioSnap command that is most helpful in this situation is the Quantize to Pool command. The way it works is you decide which clip has the correct rhythm, you add that clip’s transient markers to the Pool, and then you quantize the other clip’s transient markers to the Pool.
5. Right-click the selected clip and select Pool > Add clip to pool on the pop-up menu.
7. Right-click the selected clip and select Pool > Quantize to pool on the pop-up menu.The Quantize to AudioSnap Pool dialog box appears.
Max Distance From Pool. The value in this menu determines which notes are affected by the Quantize to Pool command. For example, if you choose Quarter in the menu, notes that are farther than a quarter note from a Pool line are not quantized.
Quantize Window. This slider fine tunes the value in the Max Distance From Pool menu. A window of 100 percent includes all markers that lie within the Max Distance From Pool value.
Quantize Strength. This slider controls quantize strength, which determines how closely the selected notes move to the Pool markers.
9. Click OK.When you fix timing errors in multi-tracked drum parts, you will frequently need to adjust all the drum parts in exactly the same way, because drum parts often contain “bleed”—the sound of other drums in the track of the drum that you are trying to record. For example, if your snare mic also picks up some of the hi-hat sound, you can’t move hi-hat clips around without also moving the snare clips in exactly the same way, because if you don’t, the sound of the hi-hat in the hi-hat track will conflict with the sound of the hi-hat in the snare track.AudioSnap’s Add Transients to Pool command and Split Beats into Clips command allow you to slice your drum tracks at identical locations, so you can then drag or quantize whole clips without stretching any audio. This method of aligning clips does not change the phase relationships between the clips, as long as you move all the clips identically.Let’s take a look at some multi-tracked drum parts, and see how to quantize them all in exactly the same way. The following project uses 10 mics, including room mics and overhead mics:
3. If necessary, edit each drum track’s transient markers so that there are no extraneous transients (use the Threshold slider, disable some transients, move others, etc.).
6. Right-click any selected drum track and select Merge and Lock Markers on the pop-up menu.
8. On the Edit menu, point to Clip Lock and click Lock Position.
Tip: If there is not a single drum track that has steady beats throughout the song, you can create a temporary guide track by bouncing all the drum tracks to a single track (select all the tracks, use the Edit > Bounce to Tracks command, select Hardware Outputs in the Source Category field in the Bounce to Tracks dialog box, and click OK).
10. Click the Set Project Tempo From Clip button to align measure lines with drum track and establish a tempo map.
12. Click the Split Beats into Clips button on the AudioSnap palette.
14. Use the Process > Quantize command to open the Quantize dialog box.
15. In the Duration field, choose Eighth (for this example).
Make sure the AudioSnap Beats check box is cleared.
Make sure the Audio Clip Start Times is selected.
Make sure the Auto XFade Audio Clips check box is selected, and the XFade and Max Gap values are set at their default values.
17. Click OK to close the Quantize dialog box.Some clips now overlap, and some clips have small gaps between them. Because the Auto XFade Audio Clips check box was enabled, and the XFade and Max Gap values were set at their default values, crossfades have been automatically added between clips, and any gaps that were smaller than the Max Gap value have been filled in. Let’s zoom in to take a closer look:A. CrossfadesNow the clips line up with eighth note boundaries, no audio has been stretched, and phase relationships have been maintained.For information about maintaining phase relationships when stretching audio, see Adjusting the timing of a multi-track performance while maintaining phase relationships.
Tip - Searching Documentation
Tip: To search for a specific topic, type your search query in the Search Cakewalk.com field at the top right of this page.
When the search results appear, click which product's documentation you would like to search to filter the search results further.
Note - Using Offline Help
Note: If you prefer to always use offline Help, go to Edit > Preferences > File > Advanced in your Cakewalk software and select Always Use Offline Help.
If you are not connected to the internet, your Cakewalk software will default to showing offline help until an internet connection becomes available.