Multitmbral Mode in Logic

Last updated on 3/18/2016

The information in this article applies to:

  • Dimension Pro
  • Rapture

To use Dimension Pro in multitimbral mode in Logic, you must create a custom environment as follows:

  1. Insert Dimension Pro (or Rapture) into an Instrument Track
  2. Open Dimension Pro Options dialog
  3. Enable 'Set Program As Multitimbral' and select OK

    Set Program As Multitimbral

  4. Open Logic's Environment window: Apple Command+8
  5. Select Audio Environment
  6. Scroll to find instrument track that contains Dimension Pro

    Audio Environment

  7. From the New menu add Multi Instrument
  8. Connect a virtual cable from the Multi Instrument to the Audio Instrument into which Dimension Pro is inserted

    Virtual Cable

  9. When 'Cable and Channel Port is set!' message appears, choose 'Remove'

    Remove

  10. In the Multi Instrument, click channels 1-4 to make them active
  11. Rename Multi Instrument to Dimension Pro
  12. Select Dimension Pro Instrument Track and set MIDI Ch to all
  13. In the Arrange Window, click+hold Dimension Pro track
  14. Navigate through menu Audio | Dimension Pro | 1 Grand Piano (note: Grand Piano represents Logic's default GM patch name and does not indicate a Dimension Pro sound program)

    Grand Piano

  15. From the Track menu, choose 'Create With Next Instrument' Mac: Apple Command+Shift or Win: Ctrl+Shift+Enter
  16. In Dimension Pro, select Elements 1-4 and load the desired Multisample (be sure to select all the elements that you intend to use)

    Elements

Cakewalk // Support // Knowledge Base // Multitmbral Mode in Logic
Copyright © 2017 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal