V-Studio 100 Firmware version 1.50 and Driver version 2.0 updates

Last updated on 3/29/2016

These updates are recommended for all V-Studio 100 users. If your current firmware is already version 1.50 or higher than you do not need to apply the firmware portion of this update.

You can check the currently installed firmware version when you power up the VS-100, the version of the current system software is displayed in the lower right corner corner of the screen.

Note: Users running previous firmware versions can jump directly to 1.50, it is not necessary to apply the firmware updates sequentially. If you would like more information on previous enhancements, you can find more information on firmware version 1.18 here and more information on firmware version 1.19 here and more information on firmware version 1.30 here.

Enhancements in firmware version 1.50

  • The VS-100 now works together with the OCTA-CAPTURE to expand the total I/O.
  • Lower latency available - Super low latency and high stability brought by newly introduced "VS STREAMING" technology.

 

 

Installation InstructionsFor firmware installation instructions review the V-Studio 100 Firmware Update Instructions.

 

 

 

 

Note: Currently firmware version 1.50 can only be updated via the "Updating using a USB cable" method found in the link above.


IMPORTANT: The V-Studio 100 Driver Version 2.0 requires that Firmware Version 1.50 is installed in order to function properly.

DownloadDownload the V-Studio 100 Firmware version 1.50 and Driver version 2.0

 

 

Cakewalk // Support // Knowledge Base // V-Studio 100 Firmware version 1.50 and Driver version 2.0 updates
Copyright © 2017 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal